🦦 Now booking window & solar panel cleaning — same-week appointments available
Exterior Cleaning

Pressure Washing Mistakes That Damage Florida Homes (and What to Do Instead)

Most damage comes from one mistake: too much pressure on the wrong surface. Here are the limits the makers publish, and the safer way to clean each surface.

Quick answer

The most common pressure washing mistake is using too much pressure on the wrong surface. Makers publish limits: stucco maker Sto says not to exceed 500 psi, Eagle Roofing says no more than 1,200 psi on concrete tile, the Asphalt Roofing Manufacturers Association says not to use a power washer to remove roof algae, and PGT says to avoid power washers on its windows. A buying guide from Home Depot calls the 2,000 to 3,299 psi class best for common jobs.

Mistake 1: too much pressure on the wrong surface

Concrete can take a lot of pressure. Most of the rest of a house cannot. Here is what the makers and trade groups say about each surface. These are their limits for their own products, so check your maker's instructions too.

SurfaceWhat the source saysSource
Asphalt shingle roofDo not use a power washer to remove algae. High-pressure washing is likely to damage asphalt roofing.Asphalt Roofing Manufacturers Association (ARMA)
Concrete tile roofWater only, at no more than 1,200 psi.Eagle Roofing
StuccoDo not exceed 500 psi. Higher pressure can destroy the surface integrity of the finish.Sto Corp.
Vinyl sidingSome makers ban pressure washers and others limit pressure and cleaners. Ply Gem allows 1,500 to 2,400 psi with a 40-degree tip, wand level and never aimed upward.Vinyl Siding Institute, Ply Gem
Windows and doorsAvoid power washers and garden hoses. Improper tools may void the warranty or damage the products.PGT
Interlocking paversProfessional cleaning is described at 1,000 to 4,000 psi, using a wide-spray nozzle at a low angle to avoid dislodging joint sand.Concrete Masonry & Hardscapes Association (CMHA)
Concrete driveway or sidewalkConcrete handles strong pressure better than most surfaces on a house. A retail buying guide lists driveways and sidewalks among medium-duty (2,000 to 3,299 psi) jobs and concrete among heavy-duty (3,300 psi and up) jobs.The Home Depot

Now compare those numbers with the machines on the shelf. Home Depot's guide groups residential machines into light-duty (300 to 1,999 psi), medium-duty (2,000 to 3,299 psi), and heavy-duty (3,300 to 4,600 psi and up). Even a medium-duty machine, the class it calls best for common jobs, runs well over Sto's limit for stucco and Eagle's for tile.

Mistake 2: aiming the stream where water can get behind things

On siding, the concern is water that ends up behind it. The Vinyl Siding Institute says to keep the stream at eye level and pointed straight at the siding, not at an angle, and Ply Gem says water can collect behind vinyl siding if you spray upward. Water forced into cracks in stucco can end up behind the finish, where you cannot see it. See how to clean stucco.

Mistake 3: a narrow nozzle, held close

A narrow stream held close puts all the force on a small spot. The tips the sources give run the other way: CMHA recommends a wide-spray nozzle at a low angle on pavers, and Ply Gem recommends a 40-degree tip on vinyl siding. On pavers the risk is washing sand out of the joints. See why driveways and pavers turn green or black.

Mistake 4: skipping the maker's instructions

Roof, siding, window, and tile makers each write their own care instructions, and a method they advise against can cause damage or affect a warranty. Look yours up before you start, and test a small spot first.

Mistake 5: climbing up with a pressure washer

Ladders and roofs are a serious fall risk. If you are not completely comfortable at height, leave it to someone who is. See cleaning second-story windows safely for the ladder basics from CDC and OSHA, and the tile roof guide for why tile is a poor place to walk.

Mistake 6: ignoring the water rules

During a water shortage order, pressure washing just for looks can be limited. Check your county's current rules before you start. See pressure washing and the water shortage in Southwest Florida.

The injury risk is real

A 2022 case report from UT Southwestern in the Journal of Education and Teaching in Emergency Medicine describes high-pressure injection injuries as rare, and says pressure as low as 100 psi can penetrate skin. It says the first signs can be benign, with minimal pain and a small puncture wound, while swelling later cuts off blood flow, and that outcomes are best when the wound is cleaned out surgically within 6 hours.

So never point the wand at a person, a pet, or your own hand or foot. If the stream ever hits skin, go to an emergency room and say it was a pressure washer, even if the wound looks small.

What to do instead

SurfaceThe safer method
Roofs (asphalt shingle or tile)Low-pressure soft wash by someone experienced with your roof type
Stucco and painted surfacesLow-pressure soft wash
Vinyl and fiber-cement sidingSoft wash, or a soft brush and low pressure, following the maker's instructions
Windows and screensHand cleaning with a squeegee and cleaning solution, never a pressure washer
Concrete driveways, walks, and pool decksPressure wash or a surface cleaner
PaversWide spray at a low angle, then refill the joint sand if needed

The difference between the two methods is covered in soft washing vs. pressure washing.

If you think something got damaged

  • Stop and take dated photos of the area and the equipment settings you used.
  • Check the maker's instructions and warranty for the product, whether it is a roof, siding, window, or finish.
  • Call a licensed professional such as a roofer or contractor to assess it. Cleaning is not a repair, and washing more will not fix damage.

How we clean

We soft wash roofs, stucco, siding, and painted surfaces at low pressure with a specially mixed biodegradable solution, and we pressure wash hard surfaces like driveways and patios. We clean windows by hand with a squeegee and never pressure wash glass. Our home soft wash, roof & gutter cleaning, and driveway & patio pages explain each service, and you can call or text (425) 977-5156 for a free quote.

Frequently asked questions

Can I pressure wash my own house?

It depends on the surface. Concrete handles strong pressure, but makers set limits for other surfaces: Sto says not to exceed 500 psi on stucco, ARMA says not to use a power washer to remove algae from asphalt shingles, and PGT says to avoid power washers on its windows and doors. Check your maker's instructions, and ask a professional if you are unsure.

How many psi is too much for stucco, tile, or siding?

Sto Corp. says not to exceed 500 psi on stucco. Eagle Roofing says no more than 1,200 psi, water only, on concrete tile. Ply Gem allows 1,500 to 2,400 psi with a 40-degree tip on vinyl siding, while some siding makers ban pressure washers entirely. Home Depot lists medium-duty machines at 2,000 to 3,299 psi, so many home machines exceed the limits for stucco and tile.

Can a pressure washer damage a roof?

Yes. ARMA says high-pressure washing is likely to damage asphalt roofing and should not be used to remove algae, and Eagle Roofing limits concrete tile to 1,200 psi with water only. A low-pressure soft wash is the usual method.

Can you get hurt by a pressure washer?

Yes. A 2022 case report in the Journal of Education and Teaching in Emergency Medicine says pressure as low as 100 psi can penetrate skin and that the first signs can be a minor-looking puncture. Never point the wand at a person, and if the stream hits skin, go to an emergency room and say it was a pressure washer.

What should I do if my pressure washer damaged my siding or roof?

Stop, take dated photos, check the maker's instructions and warranty, and have a licensed professional such as a roofer or contractor assess it. Cleaning is not a repair.

Sources & further reading

General information, not medical or repair advice. Pressure figures are the limits those makers and trade groups publish for their own products as of the dates shown, so check the instructions for yours. In an emergency call 911.

Shine Otter mascot

About Shine Otter

Shine Otter is a family owned and operated exterior cleaning company serving Southwest Florida, from Englewood and Venice to Cape Coral and Fort Myers. We handle window cleaning, roof and gutter cleaning, soft washing, driveway and patio cleaning, window screen cleaning, storm debris cleanup, and solar panel cleaning. Call or text (425) 977-5156 for a free quote. Meet the owners.

Related services

How we can help

Keep reading

More guides for Florida homeowners

Exterior Cleaning

Soft Washing vs. Pressure Washing: Which Does Your Florida Home Need?

The method matters as much as the machine. Here's which surfaces on your home need soft washing and which can handle pressure.

Read the guide
Costs & Hiring

How Much Does Driveway and Paver Cleaning Cost in Florida?

Price ranges for driveways, patios, and pavers, what pushes a quote up, and what sealing and joint sand add.

Read the guide
Job Story

Exterior Home Care in Englewood, FL: Soft Wash, Windows, Roof and Driveway

A modern home near South Venice, kept up for an owner who lives out of town: soft wash, windows, roof and driveway, with co-owner Arthur Smygov doing the work.

Read the story

See all guides →

Shine Otter mascot

Ready for the neighbors to notice?

Call or text (425) 977-5156 — or visit shineotter.com
Call Now Text Us