Siding, trim, and stucco need a different touch than concrete. Our soft wash uses low pressure and the right cleaning solution to lift dirt, mildew, and grime without risking damage to your home's exterior.
Vinyl and fiber-cement siding, painted trim, and stucco can all be damaged by high-pressure washing — cracked seams, water forced behind siding, stripped paint. That's why we never point a pressure washer at your home's exterior.
Soft washing uses a specially mixed, biodegradable cleaning solution and low water pressure to break down mildew, algae, and dirt at the source, then rinses it away gently. It's the method most manufacturers recommend for siding, and it lasts longer than a straight pressure rinse because it actually kills the organic growth instead of just blasting off the surface layer.
Soft washing uses pressure closer to a garden hose, paired with a cleaning solution that is applied, given time to work, and rinsed off. The solution does the cleaning instead of force. It is the usual choice for roofs, stucco, siding, and painted surfaces, where high pressure can crack seams, strip paint, or push water behind the finish.
Cleaning is not a repair. Cracks in stucco, failed sealant, and soft spots need a licensed professional, and washing over cracks can push water behind the finish. If your HOA has sent a letter about stains on the walls or roof, read our one-page plan for answering it first.
Pressure washing uses a concentrated high-pressure stream, sometimes with detergent, and suits hard surfaces like concrete driveways. Soft washing uses pressure closer to a garden hose with a cleaning solution that does the cleaning, and suits roofs, stucco, siding, and painted surfaces.
Read the guide: Soft Wash vs. Pressure Wash
A specially mixed, biodegradable cleaning solution and low water pressure, which breaks down mildew, algae, and dirt at the source before a gentle rinse. We never point a pressure washer at a home's exterior.
Learn more: Home soft wash
When it is done correctly, yes. A good crew protects nearby plants by wetting and rinsing them, and keeps pets and people away until surfaces are dry. Ask any company how it handles this before the work starts.
Read the guide: Soft Wash vs. Pressure Wash
Sto Corp. says not to exceed 500 psi on stucco. Eagle Roofing says to use water only, at no more than 1,200 psi, on concrete tile. Ply Gem allows 1,500 to 2,400 psi with a 40-degree tip on vinyl siding, while some siding makers ban pressure washers. Many home machines are rated higher than these limits.
Read the guide: Pressure Washing Mistakes
Use low pressure and the right cleaning solution, not a strong pressure washer. Stucco is porous, and high pressure can erode the finish and push water into cracks. Sto Corp. says not to exceed 500 psi. Test a small area first, and repair cracks or failed sealant before washing.
Read the guide: How to Clean Stucco
White, chalky spots are usually dissolved minerals such as calcium left behind when sprinkler water dries. Orange or rust-colored streaks are usually iron, which UF/IFAS says is common in Florida well water. Stop the spray from hitting the house, then clean early.
Read the guide: Sprinkler Stains
Co-owner Arthur Smygov maintains the soft wash, windows, roof, and driveway of this home near South Venice. See the photo and how we handle each surface.