Dust, pollen, and grime on your panels can quietly cut into your energy output. We clean them safely without damaging the surface or the mounting, so your system keeps performing the way it should.
Florida's pollen seasons and frequent dust can coat solar panels faster than most homeowners realize, and a dirty panel doesn't announce itself the way a dirty window does — you just see a lower number on your energy production, if you're tracking it at all. We use a soft-brush, deionized-water cleaning method built for solar glass — no abrasive pads, no harsh chemicals that could void your panel warranty.
A dirty panel does not announce itself the way a dirty window does. In Florida, the usual list looks like this:
Panels are tilted, so rain does carry some loose dust away. But light showers can turn dust into muddy streaks, grime tends to collect along the lower edge of the frame where water does not flush it out, and sticky pollen and bird droppings usually need more than rain.
The U.S. National Renewable Energy Laboratory (NREL) studied five utility-scale solar plants in North Carolina that had gone more than seven years without manual cleaning. Rain washed away some of the pollen, but output stayed below pre-pollen levels. Performance dropped by as much as 15% at the peak of pollen season, annual losses without planned cleaning could reach about 10%, and wet-brush cleaning raised performance by 5% to 11%.
Those were large ground-mounted plants in another state, so your rooftop numbers will differ. The takeaway still applies here: rain alone does not fully clean pollen off panels.
We use a soft-brush, deionized-water method built for solar glass, with no abrasive pads and no harsh chemicals that could void your panel warranty. Deionized water has its dissolved minerals removed, so it dries without leaving mineral spots. While we are up there, we also take a visual look for obvious wear or damage.
Start with a look. A visible film, streaks, or droppings are a good sign. If your system has a monitoring app, compare production on similarly sunny days over time. A gradual decline you cannot explain by weather or shading is worth checking.
Warranty terms and cleaning guidance vary by manufacturer. Following your manufacturer's cleaning guidelines should not void a warranty, but using the wrong method, such as abrasive tools or harsh chemicals, might. Check your paperwork before anyone cleans the panels.
Cleaning panels yourself is a roof job. Falls are the biggest risk, tile roofs are easy to crack underfoot, and you should never walk on the panels. If you are not completely comfortable on a roof, hiring an insured pro is the safer choice. Our full guide covers whether solar panels need cleaning in Florida.
Solar panel cleaning can be added to any Home Care Membership for $3 per panel.
Usually, at least occasionally. Florida rain washes off some dust, but it does not reliably remove pollen film, bird droppings, salt, or mineral spots. Clean gently, with a soft brush and plenty of clean water, and check your manufacturer's guidance first.
Read the guide: Do Solar Panels Need Cleaning?
There's no single rule. Many homeowners clean once or twice a year, and more often near construction, heavy tree cover, or lots of birds. Let how dirty the panels look, and what your production numbers show, guide you.
Read the guide: Do Solar Panels Need Cleaning?
No. Pressure washers can force water past seals and damage the glass coating. Use low pressure and a soft brush or cloth.
Read the guide: Do Solar Panels Need Cleaning?
Following your manufacturer's cleaning guidelines shouldn't. Using the wrong method, like abrasive tools or harsh chemicals, might. Check your paperwork before cleaning.
Read the guide: Do Solar Panels Need Cleaning?