Local hardness is about five to six grains per gallon, according to Bonita Springs Utilities, and water with minerals can leave spots on panels as it dries. We use deionized water and a soft brush, never abrasive pads or harsh chemicals.
Panels collect whatever the air carries. Pollen film and dust settle on the glass, and a rain shower rinses off some of it but not all. Sprinklers add their own mark when their water lands on panels and dries. The clue is usually a slow, unexplained drop on your production app.
We clean solar glass with gentle brushing, deionized water and nothing that scratches. Because deionized water carries no minerals, it leaves nothing behind to spot, which matters where tap water carries hardness minerals. We look the array over for obvious wear or damage as we go, and panels can be added to any membership.
Yes, it can. Bonita Springs Utilities puts hardness in its service area at 80 to 100 mg/L, so tap water that dries on panels can leave mineral spots. That is the reason we use deionized water, which is stripped of its minerals and rinses clean without a film. Rain helps with dust, but not reliably with those spots.